DMG-Mori Additive Manufacturing Lasertec-12 SLM
• Additive Manufacturing with a 125 x 125 x 200 mm build volume
• 400W fiber laser
• Build layer thicknesses between 20 and 50 μm
• Sigma Labs Melt pool monitoring system
• CELOS for optimized integration into existing process chains
• Optimized shield gas volumetric flow with powerful pumps, 3rd cyclone for powder pre- separation and duo-filter system with automatic switchover and filter changes without process interruptions
AIP6-45H Hot Isostatic Press (HIP)
• Maximum Working Pressure: 45,000 psi (310 MPa)
• Furnaces Available:
• Molybdenum: Max temp: 1400°C – Hot zone: 4” diameter x 6” height
• Kanthal: Max temp: 1150°C – Hot zone: 2.5” diameter x 6” height
• Carbon: Max temp: 2000°C – Hot zone: 2.5” diameter x 4” height
CSM-100 Canning and Welding System
• AC/DC TIG welder
• Reversible variable speed rotary turntable capable of 125mm diameter max can size
Amazemet rePowder Ultrasonic Atomizer
• Powder atomization using ultrasonic system with 40 kH frequency
• Atomization of various metals and metallic alloys
• Atomization of ~ 100 g powder a day from ~ 200 g initial material (10-15 mm dia. rod). Actual yield depends on the powder size distribution needed for printing
• Plasma torch to melt the initial material
• Atomization under Ar atmosphere
• Recirculation system to enable continuous atomization process
• Air lock vacuum-sealed containers for powder storage and transfer to glovebox
• Casting of the rod for subsequent atomization
• Water-cooled Cu plate producing high cooling rate during solidification
• Melting/casting under Ar atmosphere
• Melting of the base and master alloys to obtain target composition
• Suction casting under Ar atmosphere with and without ultrasonication
Arcast Versamelt Gas Atomizer
• Provide technical capabilities (TBD)
TECHICAL CONTACT: Prof. Ian McCue, Faculty Website, Email
Buhler AM0.5 Arc Melter
• Designed for melting samples of up to approximately 500g at temperatures up to 3500°C
• Water-cooled copper crucible plate with multi-purpose molds (for button and rod samples)
• Water-cooled, double-walled high vacuum chamber and flanges
• Motor-driven, water-cooled tungsten electrode which can be moved freely above the crucibles
• Excellent observation of the melting process through viewing port(s)
• Control panel with all major operating functions at the top of the electrode for safe and convenient operation
• Crucible plates with customized molds on request
Gleeble
Gleeble
FENN 051 2/4 Hi Rolling Mill
• 6” x 9” flat and grooved 2/4 Hi rolls
• 1.625” x 9” 4 Hi rolls
• Rolls can be heated to 400°F
• 15 HP gear motor
• Run speed: 0-50 fpm
• 100,000 lb separating force
• 2-100,000 lb load cells built in
• Data Acquisition System (DAS) monitors:
• Upper and lower roll temperatures
• Mill speed
• Mill draw current
• Inner and outer roll forces
• Expansion slots available for additional monitoring
• Data provided in Excel spreadsheet through Ethernet computer
• Safety features meet current OSHA, NU, Societal standards
FENN 4F-4 Rotary Swager
• Solid bar capacity: 0.938” (23.8mm)
• Tubing capacity: 2.25” (57.2mm)
• Motor power: 10 HP
• Motor speed: 900 RPM
• Dies/hammers designed for hot working operations
• Water Cooling if desired
• Safety features meet current OSHA, NU, Societal standards
Lindberg 51863 Box Furnace (portable)
• Temperature range: 500 – 1500°C
• Interior dimensions: 16” wide x 24” deep x 16” high
• Eurotherm Nanodac digital controller
SentroTech ST 1600C-666 Box Furnace
• Maximum temp: 1600°C
• Chamber size: 6” wide x 6” high x 6” deep
• 30 segment program controller
Econoline 101696WD-A Direct Pressure Sand Blaster
• Interior dimensions: 24” wide x 36” high x 23” deep
• Top or side opening accessible
• Direct pressure provide high pressure abrasive
• Foot pedal operated
